The 2025 SES has been upgraded to v1.2 and is now published online Series Resources under Technical Inspection Resources - SES Templates.
All of these issues are minor enough that reviewers can repair any v1.0 or v1.1 files after submission.

Items revised, feel free to use v1.2 to check your math:

1. EV Accumulator mm - Segment Pa to MPa
2. EV Accumulator - Lid shear spacing, for segments that are not mechanically attached
3. Tube EV Accumulator Chassis Mounts - Size B Min MOI
4. Monocoque Attachments - Insert typo, GPa to MPa
5. Monocoque - SIS Open Floor Energy
6. Monocoque Metal Rear Diagonal - Attachment, Tube Frame tab, Skin Pa to MPa
7. Composite Accumulator - Both skins included in bolted and continuous mount attachment calculations

Notes to EV teams:

• It will be helpful to include glass transition temperature (Tg) for any polymers used where there is a 60C requirement.
• When segments mechanically attached to the container.

Over-centering latches for the lid are not sufficient positive locking on their own.
Make sure to have a physical stop present for each latch.